Running In And Economical Driving - Skoda CITIGO Owner's Manual

Hide thumbs Also See for CITIGO:
Table of Contents

Advertisement

With driving mode set, the vehicle will not start up
If the vehicle does not start off, the problem may be that the selector lever is
not completely in the selected position. In such an instance, press the brake
pedal and put the selector lever into the required position.
Manual shifting (Tiptronic)
Fig. 93 Selector lever / display
Read and observe
and
Tiptronic mode makes it possible to manually shift gears on the selector lever.
Switching to manual shifting when the vehicle is stationary
Depress the brake pedal.
Press the selector lever twice to the left in the spring-tensioned position.
Gear changing
To change up, tap the selector lever forwards
To change down, tap the selector lever backwards
Switching to manual shifting during driving
Press the selector lever towards the left in the spring-tensioned position in
the direction of the arrow and set in position M. The selector lever position
you have engaged is shown in the instrument cluster
Temporarily switching to manual shifting in position D
Tilt the selector lever forward
If in a short time, no manual gear change takes place, then the temporary
manual shifting switches off.
The gearshift indicator should be observed when changing gear
on page 74 first.
» Fig.
93.
+
» Fig.
93.
-
display» Fig.
or rearwards
» Fig.
93.
+
-
» page
When accelerating, the gearbox automatically shifts up into the higher gear
just before the maximum permissible engine speed is reached. If a lower gear
is selected, the gearbox does not shift down until there is no risk of the engine
overrevving.
Note
It may be beneficial, for example, when travelling downhill, to use manual
shifting of gears. Shifting to a lower gear reduces the load on the brakes and
hence the wear of the brakes.
Starting-off and driving
Read and observe
Moving off and pausing temporarily
Firmly depress and hold the brake pedal.
Start the engine.
Press the selector lever towards the left in the spring-tensioned position in
the direction of the arrow
Release the brake pedal and accelerate.
The selector lever position N does not have to be selected when stopping for a
short time (e.g. at a crossroads). However, the brake pedal should be de-
pressed, in order to prevent the vehicle from rolling.
Accelerating hard while in motion (kick-down function)
If the accelerator pedal is depressed while the vehicle is in forward drive mode,
the kick-down function is turned on.
The gear change is adjusted accordingly to achieve maximum acceleration.
WARNING
Rapid acceleration ( e.g. on slippery roads) can lead to a loss of control over
the vehicle – risk of accident!
93.

Running in and economical driving

Introduction
This chapter contains information on the following subjects:
Running in the engine
30.
Tips on economical driving
and
on page 74 first.
» Fig. 92
on page 74 and insert into position D .
Starting-off and Driving
76
76
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents