Removing / inserting rear light
Fig. 148 Remove light / pull out connector
Read and observe
and
Removal
›
Open up the flap in area
in the direction of arrow
A
›
Insert the screwdriver under the bottom edge of the locking mechanism
and pull out the locking mechanism on the connector in the direction of ar-
row
.
2
›
Press the catch
in the direction of arrow
C
›
Pull out the connector in the direction of the arrow
›
Hold the lamp firmly and unscrew the plastic nut
›
Remove the lamp carefully from the body.
Inserting
›
Insert the bulb holder in the light.
›
Carefully place the tail light assembly in the opening in the body and hold
firmly.
›
Screw in and tighten the plastic nut
›
Push the connector into the bulb holder and press down on the catch
the opposite direction to arrow
›
Fold back the cover in the opposite direction to arrow
CAUTION
Ensure that the vehicle paintwork and the lamp are not damaged when remov-
ing and installing the tail lamp.
on page 122 first.
» Fig. 148
1
.
3
.
4
.
D
» Fig. 148
.
D
.
2
.
1
Replacing the bulbs in the tail lamp assembly
Fig. 149 Inner part of the lamp
Read and observe
Changing a bulb
›
.
Press down on the lamp holder
lamp.
B
›
Turn the light bulb counter-clockwise to the stop and remove it from the
bulb
holder» Fig. 149
›
Insert a new bulb into the holder and turn in a clockwise direction to the
stop.
in
B
and
on page 122 first.
» Fig. 149
- and remove the holder from the
- .
Fuses and light bulbs
125