Driving Data (Multifunction Display) - Skoda CITIGO Owner's Manual

Display » Fig. 20
Counter showing the distance travelled since the last reset (trip)

Odometer

Choose between the odometer display and the counter showing the distance
driven (trip)
›
Press down on button » Fig. 16
3
Reset counter for distance travelled (trip)
›
Select the counter for the distance driven (trip) and press down on button
» Fig. 16 on page 28 or » Fig. 17
Service interval display
The service interval display shows the mileage to the next service event.
Before the next service interval has been reached, the message  appears in
the instrument cluster display for some seconds and the remaining kilometres
are shown after switching on the ignition.
If the time of the service has been reached, an acoustic signal will sound and
the message  appears for a few seconds after switching on the ignition.
Information regarding the service intervals
Recommended gear
A suitable engaged gear or, where appropriate, a recommended gear is dis-
played, with the aim of conserving the life of the engine and increasing driving
efficiency.
30
Using the system
on page 28 or » Fig. 17 on page 28 briefly.
on page 28.
» page 87.
Fig. 21
Information on the selected
gear / Recommended gear
Display » Fig. 21
Optimal gear engaged

Recommended gear (e.g.   means that it would be beneficial to change

from 3rd gear to a higher gear)
For vehicles with automatic transmission the recommended gear will be
shown when the mode for manual gear-changing (Tiptronic) is selected.
WARNING
3
The driver is always responsible for selecting the correct gear in different
driving situations (e.g. when overtaking).

Driving data (multifunction display)


Introduction
This chapter contains information on the following subjects:
Operation
Information overview
Warning at excessive speeds
Memory
The driving data display only works when the ignition is switched on.
Operation
Fig. 22
Buttons on the control lever
30
31
31
31
32
