›
Remove the light bulb in the direction of arrow
in such a way that the fixing lugs of the light bulb socket fit into the recesses
of the lamp.
Insertion of the bulb takes place in reverse order.
Changing the bulb for daytime running lights and parking light
Read and observe
and
›
Turn the housing containing the bulb
stop in the direction of the arrow
›
Remove the housing containing the bulb in the direction of arrow
›
Remove the faulty bulb from the housing.
›
Insert a new bulb into the housing.
›
Insert the housing containing the light bulb in the lamp housing in the oppo-
site direction to arrow
.
2
›
Screw the housing in the opposite direction to arrow
place.
Changing the bulb for the front turn signal light
and insert a new light bulb
4
Fig. 143
Replacing the bulb for daytime
running lights and parking lights
on page 122 first.
» Fig. 141
on page 122 as far as the
C
» Fig. 143
.
1
until it clicks into
1
Fig. 144
Changing the bulb for the front
turn signal light
Read and observe
›
Turn the housing containing the bulb
stop in the direction of the arrow
›
Remove the housing containing the bulb in the direction of arrow
›
Unscrew the defective bulb in its housing in an anti-clockwise direction and
remove it.
›
Place a new bulb in the housing and turn it in a clockwise direction as far as
it will go.
›
Insert the housing containing the light bulb in the lamp housing in the oppo-
site direction to arrow
›
Screw the housing in the opposite direction to arrow
place.
Changing light bulbs for fog lights
.
2
Fig. 145 Remove wheel arch trim
and
on page 122 first.
» Fig. 141
on page 122 as far as the
A
» Fig. 144
.
1
.
2
1
Fuses and light bulbs
.
2
until it clicks into
123