Power Indication Led; User Interface - TIPTEL 28XS Manual

tiptel IP 28xs
R Forward the current call to the third party;
Press to dial out the last dialed number;
: Mute audio transmission locally during calls;

Power Indication LED

Table 1 Green Light
LED Status
Steady Green
Slow Blinking Green
Fast Blinking twice
Table 2 Red Light
LED Status
Steady Red
Slow Blinking Red
Fast Blinking twice
Table 3 Orange Light
LED Status
Steady Orange
Slow Blinking Orange

User Interface

There are two ways to customize specific options on your phones:
1. Configure the network through keypad.
Configure through Web UI; for the details, please refer to "Configuration and Registration".
2.
Besides the network, other information can only be set through Web UI. Please refer to the
following table for differences:
Phone options
Status
The phone is in idle mode
There is a call on muted
The phone is in DND/Forward status
There is a new voicemail for your extension
There is an incoming call to the device
There is a call on hold
Power on/ Updating
Network unavailable, the account is not registered or registration failed
--IP
--MAC
--Firmware
--Hardware
--Network
--Link Status
--Forward
- 9 -
Description
Description
Description
Content
Overview