Cecilware GB3M10-LD Operator's Manual page 11

Maintenance (continued)
Recommended preventive maintenance
1) Dispense Valves
• Check all dispense valves for lime build-up.
• Drain the water tank to just below the level of
the dispense valves.
• Remove the valves and clean. (Take these valves
apart by hand as shown).
• Replace the assembly as needed (L467AL -120V
or L676AL - 230V import).
• Replace the valve into the tank and refill tank.
• Repair Kit M491QL.
WATER FLOW ADJUSTMENT
Dispense Valve
GB Series
2) • Check all chamber mounts for signs of wear:
• Product running down the front of the unit.
• Product built up on the back of chamber
mount.
• Remove chamber mount.
• Clean and re-lubricate motor shaft using food
grade lubricant only.
• Replace with new chamber mount.
3) • Clean out vent motor, trough, and tubing.
• Lift up black tabs, remove trough drawer.
• Clean and replace trough drawer.
• Remove hose assembly from the motor.
• Clean out and replace hose.
Chamber Mount
Cecilware
®
11