Table of Contents
Advertisement
No
Operating status
or fallen below
208
System incident on feed
phase (voltage peak)
210
Mains frequency limit
211
exceeded or fallen below
Diagnosis support during
212
to
service
219
220
Measured temperatures
to
too high
224
230
Temperature sensor
to
defective
233
234
Diagnosis support during
to
service
289
Subsequent error in case
290
of system incident or
excess temperature
291
Diagnosis support during
to
service
299
Warning
300
Diagnosis support during
to
service Inverter stores
399
warning in event memory
Information
400
Diagnosis support during
to
service Inverter stores
499
warning in event memory
User's Guide THEIA S String Inverters
Measure
If error occurs frequently, have all bondings and fuses between the
consumer's terminal and the inverter checked. Have the mains
quality checked.
If inverter is running on emergency power (different mains
frequency), then no action required
Provide the service personnel with the error code if required
Check ventilation openings
Separate inverter from mains. Restart inverter. If measure is not
successful call service personnel.
Provide the service personnel with the error code if required
No action required
Provide the service personnel with the error code if required
Provide the service personnel with the error code if required
Provide the service personnel with the error code if required
357100.013, Issue 2.0, 2010 Aug
55
Hide quick links:
Advertisement
Table of Contents
