Initial Startup Of A Single Inverter - Eltek Valere THEIA S User Manual

Initial Startup of a Single Inverter

• Switch on the main power supply (fuse)
For inverters with DC disconnector:
• Set switch knob to '1'
The inverter is supplied with power. Configuration through the following dialogs.
Start initial startup
Key Function
OK Start configuration process with this inverter
Language selection
Key Function

Select language
OK Accept selected language
After the configuration process has been started:
- The inverter scans the network connected by the EIA485-Bus for other inverters.
- All other inverters connected to the network are blocked.
EIA485 bus
As long as the network scan (Scanning Network) is still in process, the display shows the
following screen:
18
User's Guide THEIA S String Inverters
357100.013, Issue 2.0, 2010 Aug