Eltek Valere THEIA S User Manual page 10

Inverter
Mount inverters as follows:
• Observe a minimum distance of 50cm to the floor
• Slide the inverter heat sink into mounting fixture (2). Use the outer cooling fins as
guides in mounting fixture (2).
• Hold the inverter at molded grips (7) and push up until mounting bolts (5) drop into
slotted pieces (4) on both sides.
• Gently let down the inverter.
With the mounting bolts (5) seated in the slotted pieces.
• Verify that minimum distances are kept (see Figure 2)
• Verify that the inverter is hanging in the mounting fixture correctly
• Secure the inverter by inserting and tightening the locking screw (6) in the marked
position (paper strip)
• Ensure that the locking screw (6) is accessible for the dismounting of the inverter
10
Figure 2 Spacing between mounted inverters
User's Guide THEIA S String Inverters
357100.013, Issue 2.0, 2010 Aug