Eltek Valere THEIA S User Manual page 47

Reconfiguration
Inverter shows screen Start initial startup (see Chapter 5, section Initial startup of a
single inverter)
Start Up
Key Function
OK Return to menu Service
ESC Return to menu Service
This displays the startup date.
Note:
This menu is read only. Values cannot be changed.
Meter
Key Function
OK Return to menu Service
Return to menu Service
ESC
The menu is only a display Values cannot be changed
Inverter numbering
To change the inverter numbering after startup:
• Select Reconfiguration in the Service Menu
• Change inverter numbers see Chapter 5, section Initial startup of a single
inverter, subsection Inverter numbering.
User's Guide THEIA S String Inverters
357100.013, Issue 2.0, 2010 Aug
47