Startup - Eltek Valere THEIA S User Manual

5. Startup

Note:
Independent of demand, the inverter activates the fan as soon as power input is started (e.g. every morning). When
feeding in, the inverter activates the fan as required.
During the startup, several basic settings such as language selection, date and time settings
are set.
If several inverters are installed which are networked via the EIA485 interface, the startup
can be carried out at any one of the installed inverters (master programming). This inverter
transmits the configuration settings to all other inverters in the network. Every inverter is
automatically assigned a number at its initial startup. The free allocation of this number is
possible in a further step.
The inverters that are not used for input entries display other screen contents depending on
the menu. If no entry is possible, the inverter shows the start screen.
Start screen
All inverters that are not operated during the configuration will show the blocking screen.
Note:
If parameters of the inverter have been adapted to special requirements of the energy supplier, this is indicated on
the start screen.
After changing parameters, the inverter shows the following screen:
17
User's Guide THEIA S String Inverters
357100.013, Issue 2.0, 2010 Aug