Eltek Valere THEIA S User Manual page 20

Screen Inverter numbering:
Key Function

YES = Allocate user-defined number to inverter
NO = Accept inverter number unchanged
OK Confirm selection
If NO was selected:
— The inverter adopts the displayed number und switches to the Settings Date screen
If YES was selected:
— The display shows the following screen
Note:
The following screen is not displayed if only one inverter is configured:
Key Function
OK The inverter adopts the next available number
After OK was selected:
• Allocate numbers to inverters in the required sequence
— The inverter adopts the next available number
— The display shows the following screen:
Example:
As soon as the OK key was pressed at the first inverter, this inverter is allocated no. 1,
which is shown on the display. When the OK key was pressed at the second inverter, this
inverter is allocated no. 2, etc...
Note:
The following screen is not displayed if only one inverter is started up.
20
User's Guide THEIA S String Inverters
357100.013, Issue 2.0, 2010 Aug