Warranty Conditions - Calorex aa300 Technical Manual

6.0 WARRANTY CONDITIONS

The following exclusions apply to the Warranty given by Calorex Heat Pumps Ltd. No claims will be accepted if :-
1.The heat pump is incorrectly sized for the application.
2.The heat pump is installed in any way that is not in accordance with the current procedures as defined by
Calorex Heat Pumps Ltd.
3.The heat pump has been worked upon or is adjusted by anyone other than a person authorised to do so by
Calorex Heat Pumps Ltd.
4.The air flow to and from the machine is outside the specified limits.
5.The water flow through the machine is outside the specified limits.
6.The heat pump has suffered frost damage.
7. The water pH level and/or chemical balance is outside the following limits:
Acidity pH
Total Alkalinity, as CaCO
Total Hardness, as CaCO
Total Dissolved Solids
Maximum Salt Content
Free Chlorine Range
Free Chlorine Range
Superchlorination
Bromine
Baquacil
Ozone
Maximum Copper Content
Aquamatic Ionic Purifier
8.The electrical supply is insufficient or in any way incorrect.
9.The fan amps and duct pressure are outside the specified limits.
10. The heat pump must be maintained to the service requirements in section 2.6.
Note:- The Reply Paid Warranty Registration Card must be returned, to ensure that the correct warranty is given. If
you do not find a Registration Card with your Heat Pump please contact the Calorex Service Department giving
your name, address, model & serial number of your heat pump. A card will be sent to you for completion.
3
3
IF IN ANY DOUBT PLEASE ASK
Page 28
pH 7.2 - 7.8
ppm 80 - 120
ppm 150 - 250
ppm 1000
ppm 8000
ppm 1 - 2 Domestic
ppm 3 - 6 Commercial
max 30ppm for 24 hrs
ppm 2 - 5
ppm 25 - 50
ppm 0.9 Max
ppm 1
ppm 2 Max