Led Indicators - Avigilon 12W-H3-4MH-DC1 Installation Manual

LED Indicators

Once connected to the network, the Connection Status LED will display the progress in connecting to the
Network Video Management software.
The following table describes what the LEDs indicate:
Connection State
One short flash every
Obtaining IP Address
second
Two short flashes
Discoverable
every second
Two short flashes
Upgrading Firmware and one long flash
every second
Connected On
16
Connection Status
LED
Attempting to obtain an IP address.
Obtained an IP address but is not connected to the Network Video
Management software.
Updating the firmware.
Connected to the Network Video Management software.
Description
LED Indicators