Related Manuals for Avigilon 9W-H3-3MH-DP1-B
Summary of Contents for Avigilon 9W-H3-3MH-DP1-B
- Page 1 Installation Guide Avigilon™ HD Multisensor Dome Camera Models: 12W-H3-4MH-DP1, 12W-H3-4MH-DP1-B, 9W-H3-3MH-DP1 and 9W-H3-3MH-DP1-B...
- Page 2 Power over Ethernet (PoE) IEEE802.3at Type 2 compliant Power Sourcing Equipment (PSE) rated 50-57 VDC, 25.5 W min. Any external power supply connected to this product may only be connected to another Avigilon product of the same model series. External power connections must be properly insulated.
- Page 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications made to this equipment not expressly approved by Avigilon Corporation or parties authorized by Avigilon Corporation could void the user’s authority to operate this equipment.
- Page 4 ® in proximity to each trademark in this document is not a disclaimer of ownership of the related trademark. Avigilon Corporation protects its innovations with patents issued in the United States of America and other jurisdictions worldwide: http://www.avigilon.com/patents. Unless stated explicitly and in writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other intellectual property rights of Avigilon Corporation or its licensors.
-
Page 5: Table Of Contents
Table of Contents Overview Front View Top View Female NPT Adapter Male NPT Adapter Installation Camera Package Contents Precautions for Installing Near Salt Water Installation Steps Removing the Dome Cover (Optional) Configuring Onboard Storage Installing the Female NPT Mount Adapter Installing the Male NPT Mount Adapter Connecting Cables Securing the Dome Camera... -
Page 6: Overview
Overview Front View NOTE: There may be three or four camera heads depending on your camera model. 1. Configuration ethernet port A secondary Ethernet port for configuring the camera. Does not accept PoE. 2. Serial number tag Device information, product serial number and part number label. 3. -
Page 7: Top View
Top View 1. External power Accepts an external power connection when Power over Ethernet is not available. 2. Lanyard anchor The safety lanyard attaches to the anchor to prevent the camera from falling during installation. 3. Ethernet port Accepts an Ethernet connection to a network. Server communication and image data transmission occurs over this connection. -
Page 8: Male Npt Adapter
Standard 1-1/2” female NPT adapter for mounting the dome camera to a pendant mount bracket. 2. Tamper resistant screws Torx captive screws to fix the dome camera to the NPT adapter. Male NPT Adapter For 12W-H3-4MH-DP1-B and 9W-H3-3MH-DP1-B Male NPT Adapter... - Page 9 1. Tamper resistant screws Torx captive screws to fix the dome camera to the NPT adapter. 2. 1-1/2” NPT mount adapter Standard 1-1/2” male NPT adapter for mounting the dome camera to a pendant mount bracket. Male NPT Adapter...
-
Page 10: Installation
Teflon Sealing Tape RJ-45 crimp-on plug and weather-resistant housing External Power wiring harness External I/O wiring harness B. Avigilon HD Multisensor Dome Camera (12W-H3-4MH-DP1-B and 9W-H3-3MH-DP1-B) PTZMH-MT-NPTA1 kit: 1 ½” male NPT adapter PTZMH-ACCS-CABL1 kit: 1 ½” NPT locking nut... -
Page 11: Precautions For Installing Near Salt Water
Follow these precautions to avoid camera issues when installing in a salt heavy environment: Use mounting accessories offered by Avigilon. All Avigilon accessories are tested to work with Avigilon cameras in the rated environments. -
Page 12: (Optional) Configuring Onboard Storage
4. Push the camera module back into the base and tighten the screws 5. Access the camera’s web interface to enable the onboard storage feature.For more information, see the Avigilon High Definition H.264 Camera Web Interface User Guide. Installing the Female NPT Mount Adapter CAUTION —... - Page 13 1. Wrap the thread of the mounting bracket with the supplied Teflon sealing tape to create a water tight seal around the camera connection. There should be three to five turns around the entire threaded surface. When applying the Teflon sealing tape, be sure to wrap in the same direction that the mount will be tightened.
-
Page 14: Installing The Male Npt Mount Adapter
4. Install the 1 1/2” NPT mount adapter below the locking nut. 5. ConnectthesafetylanyardfrominsidetheNPTmountadaptertotheanchoronthedomecamera. Installing the Male NPT Mount Adapter CAUTION — The dome camera must be mounted as instructed below or problems with moisture may arise and will not be covered by the dome camera warranty. If you are installing the camera that is provided with a male NPT adapter (12W-H3-4MH-DP1-B or 9W-H3-3MH- DP1-B), the dome camera must be mounted on a 1-1/2”... - Page 15 2. Use the provided mounting template to drill four mounting holes into the mounting surface. If you are using the rear cable entry hole, also drill the cable entry hole in the mounting surface. 3. Fasten the pendant wall mount bracket to the mounting surface. 4.
- Page 16 6. Tighten the wall mount screws to secure the wall mount to the bracket. Use the T20 Torx key provided in the camera package. 7. Wrap the thread of the NPT adapter with the supplied Teflon sealing tape to create a water tight seal around the camera connection.
- Page 17 This will ensure the tape does not unravel when installing the mating parts together. Tip: Always apply Teflon tape to threaded mounts to help prevent the threads from binding. 8. Loosely thread the lock nut onto the NPT adapter, then secure the NPT adapter into the pendant wall mount.
-
Page 18: Connecting Cables
9. Connect the safety lanyard from inside the NPT mount adapter to the anchor on the dome camera. Connecting Cables Refer to the diagrams in the Overview section for the location of the different connectors. To connect the cables required for proper operation, complete the following: 1. -
Page 19: Assigning An Ip Address
The IP address settings can be changed using one of the following methods: Camera's web browser interface: http://<camera IP address>/ Network video management software application (for example, Avigilon Control Center (ACC)™ software). ARP/Ping method. For more information, see Setting the IP Address Using the ARP/Ping Method on page 21. -
Page 20: Accessing The Live Video Stream
Live video stream can be viewed using one of the following methods: Web browser interface: http://<IP address>/ Network video management software application (for example, the Avigilon Control Center software). NOTE: The default camera username is admin and the default camera password is admin. -
Page 21: Installing The Dome Cover
Additional information about setting up and using the device is available in the following guides: Avigilon Control Center Client User Guide Avigilon High Definition H.264 Web Interface User Guide Avigilon Camera Configuration Tool User Guide The manuals are available on the Avigilon website: http://www.avigilon.com/support-and-downloads... -
Page 22: Cable Connections
Cable Connections Connecting External Power NOTE: Do not perform this procedure if Power over Ethernet (POE) is used. If PoE is not available, the dome camera can be powered with 24 V AC or 24 V DC through the removable power connector: 1. - Page 23 Figure 1: Example application. 1. Grey — Relay ground return 2. Red — Relay input: To activate, connect the Input to the Ground pin. To deactivate, leave disconnected or apply between 3-15 V. 3. Pink — Relay output: When active, Output is internally connected with the Ground pin. Circuit is open when inactive.
-
Page 24: Led Indicators
LED Indicators Once connected to the network, the Connection Status LED will display the progress in connecting to the Network Video Management software. The following table describes what the LEDs indicate: Connection Status Connection State Description One short flash every Obtaining IP Address Attempting to obtain an IP address. -
Page 25: Resetting To Factory Default Settings
Resetting to Factory Default Settings If the camera no longer functions as expected or if you are unable to focus the camera heads, you can choose to reset the camera to its factory default settings. Use the firmware revert button to reset the camera. The firmware revert button is shown in the following diagram: NOTE: Be careful not to scratch the dome bubble. -
Page 26: Setting The Ip Address Using The Arp/Ping Method
Setting the IP Address Using the ARP/Ping Method Complete the following steps to configure the camera to use a specific IP address: 1. Locate and copy down the MAC Address (MAC) listed on the Serial Number Tag for reference. 2. Open a Command Prompt window and enter the following commands: a. -
Page 27: Cleaning
Cleaning Dome Bubble If the video image becomes blurry or smudged in areas, it may be because the dome bubble requires cleaning. To clean the dome bubble: Use hand soap or a non-abrasive detergent to wash off dirt or fingerprints. Use a microfiber cloth or non-abrasive fabric to dry the dome bubble. -
Page 28: Specifications
Specifications Camera 12W-H3-4MH-DP1 and 12W-H3-4MH-DP1-B – 4 x 3MP 2.8-8 mm, F1.3, P-iris Lens 9W-H3-3MH-DP1 and 9W-H3-3MH-DP1-B – 3 x 3MP 2.8-8 mm, F1.3, P-iris Audio Input/Output Line level input and output Onboard Storage SD/SDHC/SDXC slot – minimum class 4; class 6 or better recommended... - Page 29 Power Connector Waterproof 2-pin connector RTC Backup Battery 3V Manganese Lithium Environmental -40 °C to +50 °C (-22 °F to 122 °F) with external power or IEEE 802.3at Type 2 PoE Plus Operating Temperature -20 °C to +50 °C (-4 °F to 122 °F) with IEEE 802.3af Class 3 PoE power Storage -10 °C to +70 °C (14 °F to 158 °F) Temperature...
-
Page 30: Limited Warranty And Technical Support
Limited Warranty and Technical Support Avigilon warrants to the original consumer purchaser that this product will be free of defects in material and workmanship for a period of 3 years from date of purchase. The manufacturer’s liability hereunder is limited to replacement of the product, repair of the product or replacement of the product with repaired product at the discretion of the manufacturer.