Introduction - Flashforge FINDER User Manual

A.

Introduction

This User Guide is designed to start your journey with the Finder 3D
2
Printer off in the right direction. It presents the operation process on the
basis of the window 7 operating system. To get familiar with the machine,
it is essential for you to read through this guide. This User Guide includes
four chapters.
In the first chapter, you will learn how to get set-up the Finder for the first
print. In the second chapter, you will learn the ins and outs of FlashPrint
software. The third chapter will take you through printing operation and
different printing methods. The last chapter includes information
regarding obtaining support.
Ensure that you have read the following section carefully prior
：
to setting up and operating the Finder
Ensure that the Finder is earthed lest electrostatic interference.
Before repairing or making any alterations to the Finder, it is essential
that the machine is turned off, and the power cord is unplugged.
The Finder operates at a very high temperature; allow the nozzle,
extruded plastic and heating plate to cool before touching.
Certain types of plastic filament may give off a slight odor when heated.
Because of this, the Finder should always operate in a well-ventilated
area.
Do not leave the Finder unattended when in operation.
Finder User Guide| www.ff3dp.com