Maintenance And Priority Codes; Downloading Access Code; Do Not Use - DSC PC560 User Manual

[13]

Maintenance and Priority Codes

Maintenance Codes are transmitted to indicate various trouble conditions and their restorals; Priority Codes
are used to indicate the activation of the [F], [A] and [P] keys. Program a 2-digit code for each of the following
conditions:
• Battery Trouble
• Battery Trouble Restore
• Periodic Test Code
• Police Code
The Periodic Test Code is transmitted to the monitoring station once every 24 hours. The first transmission will
be sent 12 hours after the system is first powered, and then once every 24 hours after the initial transmission.
If the Police Code is programmed and enabled (by turning ON zone Light 4 in Section [05]) it will be transmitted
to the monitoring station if two or more alarms occur during the same armed period. The Police Code will be
sent immediately after the transmission of the second alarm code.
[14]

Downloading Access Code

This 4-digit code allows the panel to confirm that it is communicating with a valid downloading computer.
Enter a 4-digit code using the numbers 0 through 9 and the hexadecimal numbers A through F. The default
code is [0505].
[15]

Do Not Use

Programming Section [15] is normally used only upon instruction from factory technical personnel for
specialized programmed not covered by the standard programming instructions.
• [P] Key alarm
• [A] Key alarm
• [F] Key alarm
• [P] Key restore
• [A] Key restore
• [F] Key restore
17