First System Option Code; Second System Option Code - DSC PC560 User Manual

[05]

First System Option Code

When Section [05] is entered, the 4 Zone Lights will be ON or OFF to indicate which options are selected.
To turn a Zone Light ON or OFF, press a number from [1] to [4]. If the light was OFF, it will come ON; if the light
was ON, it will be shut OFF.
LIGHT
[1] ON =
• OFF =
[2] • ON =
OFF =
[3] ON =
• OFF =
[4] ON =
• OFF =
∗ ∗ ∗ ∗ ∗
Turning Zone Light 3 ON programs the KEY Terminal as a Tamper Zone. Refer to the Hook-up Diagram
for wiring instructions.
∗∗ ∗∗ ∗∗ ∗∗
∗∗
Do not enable the Police Code if a Police Code is not programmed in Section [13]. Refer to
Programming Section [13] for instructions and for information on how the Police Code is transmitted.
[06]

Second System Option Code

Refer to Section [05] for programming information.
LIGHT
[1] • ON = DTMF dialing
OFF = Pulse dialing
[2] ON = 1400 Hz Handshake
• OFF = 2300 Hz Handshake
[3] ON = DLS Answer enabled
• OFF = DLS Answer disabled
[4] ON = Ringback enabled
• OFF = Ringback disabled
• Factory default settings
If DLS Answer is disabled, the PC560 will not answer calls from a downloading computer.
If DLS Answer is enabled, the PC560 will only connect to the downloading computer using the "double call"
technique. The system must be called by the downloading computer, and the computer must allow the
telephone line to ring only once or twice. After one or two rings, the downloading computer must hang-up
the line and then place another call to the PC560 within 60 seconds. The PC560 will then answer the second
call on the first ring. Note that the "double call" technique is the only means of connecting to the downloading
computer.
If Ringback is enabled, the keypad will sound a series of beeps after the system has communicated with the
monitoring station. The beeps will sound after the system has received the kissoff handshake from the
monitoring station's receiver. This is used to indicate to the user that the monitoring station has successfully
received the event being reported. NOTE: Do not use the Ringback feature if silent zones are programmed
on the system.
Momentary-contact Keyswitch Arming
Maintained-contact Keyswitch Arming
[P] Key: silent alarm
[P] Key: audible alarm
KEY Terminal as Tamper Zone
Keyswitch Operation Enabled
∗∗ ∗∗ ∗∗ ∗∗ ∗∗
Police Code Enabled
Police Code Disabled
∗ ∗ ∗ ∗ ∗
15