Service Menu - Stryker PneumoSure Service Manual

5

Service Menu

Use the service menu to do the following:
• calibrate the device,
• conduct a 12 hr test,
• restore factory settings (factory reset),
• delete contamination warning signal,
• view the software version of the board,
• view the customer version of the board.
Please note the following information:
• Input is via the touch display.
• Confirm input by pressing the SAVE key.
• A step back or exiting the menu level is carried out with the EXIT key.
• When using the calibration adapter, note the mounting instructions as de-
scribed in chapter 4.7 Mounting the Calibration Adapter .
• Always make sure the 3-port valve is positioned correctly when using the cali-
bration adapter as depicted in the corresponding illustration.
• Always follow the described sequence of steps or the sequence of the service
menu when performing calibrations.
The following pages depict the overview flow diagrams.
Service Menu
Options
Note
EN
23