Additional Information; Data Storage - Net to Net Technologies 12-Port SHDSL Access Multiplexer SAM2000G-12 User Manual

12-port shdsl access multiplexer
Table of Contents

Advertisement

The SAM2000G-12, SAM2000Q-12 and SAM2000-12 each have nine SHDSL bandwidth options; default
is 272 kbps. Distance capabilities at each bandwidth vary, dependent upon the type of line code being
utilized. Distances listed below assume the use of 26 American Wire Gauge (AWG) cable; connections
made with cable of a greater gauge will link up at greater distances. The ports on your module may not link
up if your cables are in poor condition or if cable distances are greater than the configured bandwidth will
support. Although it is sometimes possible for links to be achieved under such conditions, traffic quality
may be effected (e.g., packets may be dropped).
SHDSL BANDWIDTH
SAM2000G-12
TC/PAM line code:
SHDSL
SAM2000Q-12
DISTANCE
2B1Q line code
SAM2000G-12
CAP line code

6.0 ADDITIONAL INFORMATION

6.1 Data Storage

Configuration backup is inherent in Net to Net Technologies IP DSLAMs. SAM2000G default
parameters remain in place unless changed via CLI, NMS or SNMP. Once changed, new
configurations are automatically recorded in both RAM and NVRAM.
6.1.1 Memory
6.1.1.1 Random Access Memory (RAM)
Data stored in SAM2000G RAM will be erased if the module is removed from your IP
DSLAM or if your IP DSLAM loses power.
6.1.1.2 Non-Volatile Random Access Memory (NVRAM)
Data stored in the NVRAM of your IP DSLAM's MUM will remain intact (even if your IP
DSLAM loses power) unless deliberately cleared or reconfigured.
6.1.2 Local Files
Management and interface module configurations can be saved on your PC, or local network,
both as a backup and/or for use as a template for future configurations, via the MUM in your
IP DSLAM. Management configurations and all interface module port configurations are saved
210-0000026 rev07
kbps
2,320
2,064
feet
11,300
12,200
meters
3,444
3,719
feet
10,400
10,800
meters
3,170
3,292
feet
11,000
11,900
meters
3,353
3,627
1,552
1,040
784
12,800
16,000
16,800
3,901
4,877
5,121
13,400
14,800
15,800
4,084
4,511
4,816
12,600
15,500
16,000
3,840
4,724
4,877
528
400
272
18,400
19,400
20,200
5,608
5,913
6,157
17,400
18,200
19,200
5,304
5,547
5,852
17,900
18,900
23,100
5,456
5,761
7,041
144
25,400
7,742
23,800
7,254
24,700
7,529

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 12-Port SHDSL Access Multiplexer SAM2000G-12 and is the answer not in the manual?

This manual is also suitable for:

Sam2000gSam2000q-12Sam2000-12

Table of Contents