Led Indications - Net to Net Technologies 12-Port SHDSL Access Multiplexer SAM2000G-12 User Manual

concurrently; SAM2000G configurations cannot be saved independently. Once your IP DSLAM
has been configured as desired (including the SAM2000G), settings can be flash uploaded (to
a local file) through a Trivial File Transfer Protocol (TFTP) tool with a GET command and the
following information:
6.1.2.1 Backup
An IP DSLAM backup file records ALL management and port configurations.
6.1.2.2 Template
An IP DSLAM template file records all management and port configurations EXCEPT the
MUM's IP Address.
Configuration files can also be flash downloaded FROM a local file TO an IP DSLAM, simply
replace the GET command with a PUT command. Refer to your TFTP user manual for further
instruction.

6.2 LED Indications

LED
Power (PWR)
SHDSL Link (Lk)
210-0000026 rev07
ITEM DATA NEEDED FOR BACKUP
Host Name DSLAM_IP Address (xxx.xxx.xxx.xxx)
Remote Filename NVR_BACKUP.BIN.[superuser password] nvr_backup.bin.Password
Local Filename user preference
ITEM DATA NEEDED FOR BACKUP
Host Name DSLAM_IP Address (xxx.xxx.xxx.xxx) 193.166.254.98
Remote Filename NVR_CFG.BIN.[superuser password]
Local Filename user preference
State Indication
solid green SAM2000G is
operational
pulsing SHDSL connection
green is established and
active
solid green problematic SHDSL
connection
no no SHDSL
illumination connection
193.166.254.98
dslam27_mum13_backup.bin
EXAMPLE
nvr_cfg.bin.Password
n2n_dslam12000_template.bin
Additional Information
If the Power LED is not illuminated, it is unlikely
that the SAM2000G-12 is receiving power, in
which case none of the LEDs will be illuminated.
The SHDSL link is operational and traffic is
flowing.
A connection exists but there is indication of a
problem with the SHDSL line.
EXAMPLE