User Settings - Honeywell HUS-NVR-1032/6032-E User Manual

System Operation and Configuration

User Settings

70
Image
Click "Image" and select HDMI/VGA or CVBS to modify image parameters as shown in the
following figure:
Figure 5-80 Image Parameters
Patrol
See "Patrol" section on page 44.
Click User Settings in Figure 5-68
options: "User Management" and "Role Authority" as shown in the following figure:
Figure 5-81 User Settings
User Management
Click "User Management" to view the basic information of current selected user, reset
password, etc., as shown in the following figure:
Figure 5-82 User Management
to enter the User Settings screen and where there are 2