Factory Settings; Factory Settings For Router Model Mr90 - NETGEAR MR90 User Manual

Factory settings

You can return your router or satellite to its factory settings. Use the end of a paper clip
or a similar object to press and hold the Reset button on the back of the router or
satellite for at least seven seconds until the router or satellite LED blinks. The router or
satellite resets, and returns to the factory settings.

Factory settings for router model MR90

The following table shows the factory default settings for the router.
Table 4. Factory default settings for the router
Feature
Router login User login URL
User name (case-sensitive)
Internet connection WAN MAC address
WAN MTU size
Port speed
Local network (LAN) LAN IP
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
saving time
Supplemental Information
Nighthawk Tri-band Mesh WiFi 6E
Default Setting
http://www.routerlogin.net
admin
Use default hardware address
1500
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
192.168.1.2
192.168.1.254
Disabled
GMT for WW
GMT -8 for NA and CN
GMT +10 for AU
GMT +9 for KO
GMT +8 for PR
GMT +5:30 for IN
Disabled
158 User Manual