Shell Commands; Common Commands - Motorola nvg589 Administrator's Hanbook

Vdsl2
Hide thumbs Also See for nvg589:
Table of Contents

Advertisement

SHELL Commands

Common Commands

arp nnn.nnn.nnn.nnn
Sends an Address Resolution Protocol (ARP) request to match the
Ethernet hardware address.
clear [ yes ]
Clears the configuration settings in a Motorola Gateway. You are prompted to confirm the clear command by
entering yes.
clear_certificate
Removes an SSL certificate that has been installed.
configure
Puts the command line interface into Configure mode, which lets you configure your Motorola Gateway with Con-
fig commands. Config commands are described starting on
download [ server_address ] [ filename ] [ confirm ]
This command installs a file of configuration parameters into the Motorola Gateway from a TFTP (Trivial File
Transfer Protocol) server. The TFTP server must be accessible on your Ethernet network.
You can include one or more of the following arguments with the download command. If you omit arguments, the
console prompts you for this information.
The
server_address
the Motorola Gateway configuration file.
The
filename
argument identifies the path and name of the configuration file on the TFTP server.
If you include the optional confirm keyword, the download begins as soon as all information is entered.
You can also download an SSL certificate file from a trusted Certification Authority (CA), on platforms that support
SSL, as follows:
download [-cert] [server_address ] [filename] [confirm]
install [ server_address ] [ filename ] [ confirm ]
Downloads a new version of the Motorola Gateway operating software from a TFTP (Trivial File Transfer Protocol)
server, validates the software image, and programs the image into the Motorola Gateway memory. After you install
new operating software, you must restart the Motorola Gateway.
The
server_address
operating software is stored. The
on the TFTP server.
If you include the optional keyword
form the operation.
argument identifies the IP address of the TFTP server from which you want to copy
argument identifies the IP address of the TFTP server on which your Motorola Gateway
filename
argument identifies the path and name of the operating software file
confirm
, you will not be prompted to confirm whether or not you want to per-
nnn.nnn.nnn.nnn
page 121
.
IP address to an
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents