Motorola nvg589 Administrator's Hanbook page 117

reset dhcp client renew [ vcc-id ]
Renews the DHCP lease the Motorola Gateway is currently using to acquire the IP settings for the specified DSL
vcc-id
port. The identifier is an "index" letter in the range B-I, and does not directly map to the VCC in use.
reset dhcp client release
Enter the without the variable to see the letter assigned to each virtual
circuit.
reset dsl
Resets any open DSL connection.
reset ppp vccn
Resets the point-to-point connection over the specified virtual circuit. This command only applies to virtual circuits
that use PPP framing.
show atm [all]
Displays ATM statistics for the Motorola Gateway. The optional all argument displays a more detailed set of ATM
statistics.
show ppp [{ stats | lcp | ipcp }]
Displays information about open PPP links. You can display a subset of the PPP statistics by including an optional
stats lcp ipcp show ppp
, or argument for the command.
,
start ppp vccn
Opens a PPP link on the specified virtual circuit.
117