Motorola nvg589 Administrator's Hanbook page 144

Vdsl2
Hide thumbs Also See for nvg589:
Table of Contents

Advertisement

Administrator's Handbook
set link name name tagged-vlan name integer priority [ 0 - 7 ]
Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with unmarked
priority bits (pbits) will be re-marked to this priority.
set link name name supplicant type [ none | eap-tls ]
Specifies whether the EAP TLS supplicant is enabled on the link named name. Default is eap-tls.
set link name name supplicant priority [ 0 - 7 ]
Sets the supplicant priority on the link named name when supplicant type is eap-tls. Default is 0.
set link name name ppp sub-link link_name
Specifies a name link_name for this secondary link when one is required.
set link name name ppp auth-type [ on | off ]
Enables or disables PPP login authorization.
set link name name ppp username uname
Specifies a username uname for authentication on the specified link when ppp auth-type is set to on.
set link name name ppp password pwd
Specifies a password pwd for authentication on the specified link when ppp auth-type is set to on.
set link name name ppp magic-number [ on | off ]
Enables or disables LCP magic number negotiation.
set link name name ppp protocol-compression [ off | on ]
Specifies whether you want the Gateway to compress the PPP Protocol field when it transmits datagrams over the
PPP link.
set link name name ppp max-failures integer
Specifies the maximum number of Configure-NAK messages the PPP module can send without having sent a
Configure-ACK message. The integer argument can be any number between 1 and 20.
set link name name ppp max-configures integer
Specifies the maximum number of unacknowledged configuration requests that your Gateway will send. The inte-
ger argument can be any number between 1 and 20.
set link name name ppp max-terminates integer
Specifies the maximum number of unacknowledged termination requests that your Gateway will send before ter-
minating the PPP link. The integer argument can be any number between 1 and 10.
144

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents