Motorola nvg589 Administrator's Hanbook page 55

◆
You can test the performance of each station to station pair by clicking the
Run extended Test
you click the
If you do not run the Extended Test, the station-to-station performance section is not displayed.
◆
You can generate updated statistics by clicking the
Furnished statistics of the current and previous intervals are displayed as follows:
◆
Station ID
◆
HPNA MAC Address
◆
HPNA Firmware (C-coax, T=TP)
◆
HPNA Version
◆
HPNA Master
Short Tx Pkt
Short Rx Pkt
CRC Errors Rx
Dropped Tx
Dropped Rx
Tx Error %
Rx Error %
Frames Tx
Frames Rx
Bytes Tx
Bytes Rx
Unicast Tx
Unicast Rx
Multicast Tx
Multicast Rx
Local Control Req
Local Control Repl
Remote Control Req
Remote Control Repl
button, the following page appears as a warning about this invasive test.
Refresh
Interval Start
This is the number of Transmitted Packets
This is the number of Received Packets
This is the number of Receipt errors
This is the number of Transmit packets dropped
This is the number of Receipt packets dropped
This is the percentage of transmitted errors
This is the percentage of receipt errors
This is the number of frames transmitted
This is the number of frames received
This is the number of bytes transmitted
This is the number of bytes received
This is the number of unicast packets transmitted
This is the number of unicast packets received
This is the number of multicast packets transmitted
This is the number of multicast packets received
This is the number of requests made to the device by local control
This is the number of replies made by the device to local control
This is the number of requests made to the device by remote control
This is the number of replies made by the device to remote control
Run extended Test
button.
Interval Stop
button. When
55