◆
Primary DHCP Pool: Choose the source of the DHCP pool IP address assignment by selecting either the Pri-
vate (local to your LAN) or Public (assigned remotely) radio button.
Cascaded Router
◆
Cascaded Router Enable: If you have another router behind this Gateway, choose On from the pull-down
menu.
◆
Cascaded Router Address: If you chose On from the pull-down menu, enter the IP address of the router you
are using behind this Gateway in the LAN Private IP subnet range.
◆
Network Address: If you chose On from the pull-down menu, enter the Network Address that defines the
range of IP addresses available to clients of the router you are using behind this Gateway.
◆
Subnet Mask: If you chose On from the pull-down menu, enter the subnet mask for the Network Address that
defines the range of IP addresses available to clients of the router you are using behind this Gateway.
DHCP
◆
DHCP Lease: Specifies the default length for DHCP leases issued by the Router. Enter lease time in
dd:hh:mm:ss (days/hours/minutes/seconds) format.
If you make any changes here, click the
Save
button, and if prompted, restart the Gateway.
53