Link Commands - Motorola nvg589 Administrator's Hanbook

set ip dynamic-dns service-type [ dyndns ]
set ip dynamic-dns username myusername
set ip dynamic-dns password mypassword
set ip dynamic-dns hostname myhostname
set ip dynamic-dns retries [ 1 - 64 ]
Enables or disables dynamic DNS services. The default is off. If you specify dyndns.org, you must supply your
hostname, username for the service, and password. Number of retries defaults to 5.
Default server settings
Set ip wan-allocation mode [ normal | defaultserver ]
Sets the WAN mode to direct your Gateway to forward all externally initiated IP traffic (TCP and UDP protocols
only) to a default host on the LAN, otherwise this feature is disabled. Default is normal.

Link commands

links represent physical connections. Currently, port-based VLAN support is provided at this level. Your Gateway
is capable of adding and stripping 802.1Q tags to and from frames before transmission on its LAN interfaces. See
"Filterset commands" on page 124
also
set link name name type [ ethernet | ppp ]
Specifies whether the type of the link named name is ethernet or ppp.
set link name name mtu-override [ 0 - 1500 ]
Specifies whether the Maximum Transmission Unit value should be set to other than the standard 1500. A setting
of 0 (zero) turns off override.
set link name name igmp-snooping [ off | on ]
Turns igmp-snooping off or on on the link named name.
set link name name port-vlan ports
[ lan-1... 4 | hpna | ssid-1...4 | ptm | vc-1 | vc-2 ]
Specifies a port-based VLAN on the selected ports on the link named name.
set link name name port-vlan priority [ 0 - 7 ]
Specifies the 802.1p priority bit. If you set this to a value greater than 0, all packets of this VLAN with unmarked
priority bits (pbits) will be re-marked to this priority.
set link name name tagged-vlan name integer ports
[ lan-1... 4 | hpna | ssid-1...4 | ptm | vc-1 | vc-2 ]
Specifies a tagged VLAN on the selected port on the link named name. Default is ptm.
set link name name tagged-vlan name integer vid vlan_id
Specifies a VLAN ID (vid) on the selected link named name. Default is 0.
"Queue commands" on page 128
and for more information.
143