Configuration Status; Lhmi Menu Navigation; Default Screen - ABB REF601 Applications Manual

Section 5
Use of LHMI
5.1.5
5.2
5.2.1
26

Configuration status

At default view, whenever any key is pressed, for 3 second the Configuration status
screen appears followed by a password request screen.
Following figure shows configuration status screen:
Figure 7: Configuration status display screen

LHMI menu navigation

Default screen

The default view of the relay displays the largest phase current and earth current
which is indicated in Fig. 10. The relay returns to default screen after 5 minutes if
no key is pressed.
Current values are displayed in this view for phase current in "Amp" and for earth
current in "In" as shown in following figure.
Figure 8: Default screen of relay REF601 / REJ601
1MDU07212-YN Rev. A
REF601 / REJ601
Application Manual