Verify
6.3 Verify
VERIFY will check that all sectors are readable on the drive connected to the side of the duplicator
labaled "TARGET". If a hard drive fails duplication, you should run the Verify feature to ensure that
the drive is healthy.
To verify your hard drives for duplication:
1. From the Main menu, tap the 'SET' button to navigate to VERIFY.
2. Connect your hard drive to the side labled "TARGET". Tap the 'RUN' button to begin the
Verify process. The following screen will be displayed during verification:
3. Once the verification process has completed, the following screen will be displayed:
Tap the 'SET' button to view the total Verify time.
[VERIFY ]
[VERIFY ]
1.08%
Percentage Completed
[VERIFY ]
100.00%
20
SUCCESS