Other Operations; Erase - Kanguru KCLONE-1HD-MBC User Manual

Other Operations / Erase

6. OTHER OPERATIONS

Besides the Copy and Compare modes, the Kanguru Mobile Clone Duplicator has several additional
operations that are incredibly useful, including: ERASE, WIPE, VERIFY and LOAD.

6.1 Erase

ERASE deletes all information on any hard drive connected to the side of the duplicator labaled
"TARGET". Data is erased by writing zeros into each sector on the hard drive.
CAUTION! The Erase operation will delete all data and file systems on any attached Target hard
drives. Make sure that you back up any important data before executing the Erase operation. Only
hard drives connected to "TARGET" will be erased. Any hard drives connected to the side of the
duplicator labaled "SOURCE" will not be affected by the Erase operation.
To Erase a hard drive:
1. From the Main menu, tap the 'SET' button to navigate to ERASE.
2. Connect your hard drive to the side of duplicator labeled "TARGET". Tap the 'RUN' button to
begin the Erase process. The following screen will be displayed:
3. Once the Erase process has completed, the following screen will be displayed:
Tap the 'SET' button to view the total erase time.
[ERASE ]
[ERASE ]
1.15%
Percentage completed
[ERASE ]
100%
18
SUCCESS