Exploded View Of Selector Lever Components; Locking Cable; Adjusting Locking Cable; Removal And Installation - Volkswagen 01P Servicing Manual

Fig. 8: Exploded View Of Selector Lever Components
Courtesy of VOLKSWAGEN UNITED STATES, INC.

LOCKING CABLE

NOTE: In the following procedure, numbers in parenthesis are shown in illustration.
NOTE: Locking cable must only be adjusted in its installation position. See Fig. 10 .
Shift selector lever into "P" position and turn ignition key to end (ignition off) position. Loosen locking
cable nuts (1) and (2) at frame. See Fig. 9 . Push locking lever (arrow) until it touches selector lever. Secure
locking cable in this position on frame. After adjustment, ensure ignition key operates properly.
Fig. 9: Adjusting Locking Cable
Courtesy of VOLKSWAGEN UNITED STATES, INC.
REMOVAL & INSTALLATION
4 января 2005 г. 1:05:11
2003 Volkswagen EuroVan MV
SERVICING - A/T
Page 11 © 2004 Mitchell Repair Information Company, LLC.