Video Loss Alarm; General Settings - xmartO WOS1388 User Manual

Wireless NVR System User Manual
 If you set certain areas to be excluded from the detect areas and you still get alarm (such as
buzzer), it could be triggered by other channels.(channel 2, channel 3, channel 4...)

4.9.2 Video Loss Alarm

Function Description: If any channel lost video, users get alarms. (ex.buzzer)
Operation Steps:
1. Right click mouse in your system, choose "System setup" to enter system setup interface.
2. Choose "Record setup" - "Video detection".
3. Choose "Video Loss" from the Detection drop-down box, as shown in Image 41.
Image 41
4. Set the Alarm duration time and select motion detection output type.
5. Click "Apply" to save settings.
Tips:
 Click "Copy to" to copy settings for current channel to other channel or all channels.
4.10 General setup
4.10.1 General setup
Function Description: Basic settings and parameters.
Operation Steps:
1. Right click the mouse in your system; choose "System setup" to enter the system setup interface.
2. Choose "General setup" - "General setup", as shown in Image 42.
35