Configure; Access From Remote Pc; Login E-Seenet With Device Id - xmartO WOS1388 User Manual

Wireless NVR System User Manual
permission for this user.

5.2.4 Configure

Operation Steps:
1. Click "Configure" button
2. Enter the configure interface, as shown in Image 65.
Tips:
 The details of configure, please refer to system function introduction
 Common user needs permission to remote configures. Go to "System Setup" – "System
Management" – "User Management" – "Edit User" to check and set the remote configures
permission for this user.

5.3 Access from remote PC

5.3.1 Login e-seenet with device ID

Operation Steps:
1. Open your browser
2. Enter http://www.e-seenet.com,
in live view interface
Image 65
as shown in Image 66
50