Table of Contents
Advertisement
Wireless NVR System User Manual
see below interface, as shown in Image 24.
Image 24
2. Select "Enable" to enable FTP
3. Enter the FTP Server, Port, Username and Password.
4. Set "Schedule" and click "Test" to check if it is set successfully, if yes, click "Apply" to save the
settings.
4.4.4 E-Mail
Function Description: Used for sending customers email alert when motion is detected.
Operation Steps:
1. Right click mouse in your system, enter "System setup" – "Network setup" – "E-Mail", you'll then
see below interface, as shown in Figure 25.
22
Advertisement
Table of Contents
