Delete Device; Edit Channel - xmartO WOS1388 User Manual

Wireless NVR System User Manual

4.3.3 Delete Device

Function Description: Delete devices from the NVR
Operation Steps:
1. Right click mouse in your system, choose "IPC Add" from the drop-down menu to enter Video
Manage interface.
2. Select any of the IP Cameras that's already added to NVR and click "Delete Channel" to delete this
IP Camera from NVR (As shown in Image 19). You will no longer see this camera's footage on your
display/monitor any more.
Figure 19
Tips:
Click "Delete All" button will delete all the IP Cameras that's added to the NVR.

4.3.4 Edit Channel

Function Description: Edit channel information, including protocols, IP address, port number, user
name, password, and stream type.
Operation Steps:
1. Right click mouse in your system, choose "IPC Add" from the drop-down menu to enter Video
Manage interface.
2. Choose any of the IP Cameras and click "Edit Channel", you should then see below Interface (Figure
20). You can set all the channel information here. Click "Copy to" to apply the settings to other
channel or all channels and click "OK" to save your settings.
18