Hard Drive Settings - xmartO WOS1388 User Manual

Wireless NVR System User Manual
Camera Title
Color adjust
OSD Alpha
VGA resolution
Auto Switch
Tips:
 Skip video loss means if the screen does not show image of any channel, this channel will not be
displayed at auto switch
 Choose 1 or 4 to set how many channels be displayed at a time at auto switch, 1 means display
only one channel at a time, while 4 means display 4 channels at a time
 VGA resolution should match your screen resolution. If your NVR outputs different resolution
that your screen takes, you may not get display on the screen. Please connect the NVR to a high
resolution screen and set it to correct resolution and then connect back to your primary screen.

4.10.4 Hard drive Settings

Function Description: Allows you to format your hard drive.
Operation Steps:
1. Right click mouse in your system, choose "System setup" to enter system setup interface.
2. Choose "General setup" – "HDD Setup", you'll see below interface, as shown in Image 45.
3. Check installed hard drive information here, including Model, Capacity, Used, Status, and Format.
4. Check "Overwrite" to enable auto overwrite.
Modify the Camera Title
Set the color tone, brightness, saturation, and contrast
Modify the OSD Alpha
Select the correct screen resolution
Whether to enable auto switch and set the switch time
Image 45
38