Table of Contents
Advertisement
Wireless NVR System User Manual
4.4 Network Setting
4.4.1 Network Setup
Declaration: If the system is used for remote surveillance, you must set up the network to ensure it
work properly.
Default IP address: 192.168.1.114
Operation Steps:
1. Right click mouse in your system, choose "System setup" from the drop-down menu, click
"Network setup", you'll see below interface, as shown in Image 22.
2. Configure Network Parameter: Go to "Network setup" to modify your device's IP address, subnet
mask, gateway and etc., you can also check "DHCP" to automatically obtain IP address. Check "Device
ID" to show the device ID, which is used for remote access.
3. Click "Apply" to save the settings, or click "OK" to save and exit.
Detailed Feature List:
Name
Function Description
IP Address
Set the IP address of this device, you can choose to
manually input the IP address
Subnet Mask
Set the Subnet Mask
Gateway
Set the Gateway
MAC Address
Set the MAC Address
Web Port
Transmit video signal and other control signals,
default is 80
DHCP
Select DHCP to automatically obtain the IP address
Image 22
20
Note
Unselect the DHCP to manually set
your IP address
Avoid using same MAC Address in
LAN
Port 80 is used for web, PC client
and Mobile
When DHCP is selected, you
cannot manually set the IP Address
Advertisement
Table of Contents
