xmartO WOS1388 User Manual page 25

Wireless NVR System User Manual
Operation Steps:
1. Right click mouse in your system, enter "System setup" – "Network setup" – "PPPoE", you'll then
see below interface, as shown in Image 26.
Figure 26
2. Select "Enable", enter the Username and Password provided by ISP.
Tips:
 PPPoE Function:
for enable PPPoE, allowing access internet via dail-up; for disable
PPPoE
4.4.6 3G
Function description: this is to enable users who don't have Internet service to use USB data stick to
connect the NVR to Internet.
Operation Steps:
1. Right click mouse in your system, enter "System setup" – "Network setup" – "3G", you'll then see
below interface, as shown in Image 27.
24