Advertisement
S T E P
4
Be careful to assemble all components in the
sequence they are presented.
A.
Install cable by first assembling the ball end of the cable into the selector rod
top bolt (11) and attaching the cable cylinder lock over the ball end. Secure
with provided allen screw.
B.
Install cable over pulleys (A1 and A2) and through floating pulley
assembly (A3).
C.
Attach cable end with open eye onto the bolt assembly (25). Fully tighten
bolts.
MM
Inch
Advertisement
Need help?
Do you have a question about the G-STACK and is the answer not in the manual?