LI-COR C-DiGit User Manual page 3

Notes on Safety
LI-COR® products have been designed to be safe when operated in the manner described in this manual.
The safety of this product can not be guaranteed if the product is used in any other way than is specified in this
manual. The C-DiGit Blot Scanner is intended to be used by qualified personnel. Read this entire manual before
using the C-DiGit Blot Scanner.
Equipment Markings:
The product is marked with this symbol when it is necessary for you to refer to the manual or
accompanying documents in order to protect against damage to the product.
The product is marked with this symbol when a hazardous voltage may be present.
Manual Markings:
WARNING Warnings must be followed carefully to avoid bodily injury.
CAUTION Cautions must be observed to avoid damaging your equipment.
NOTE Notes contain additional information and useful tips.
IMPORTANT Information of importance to prevent procedural mistakes in the operation of the equipment or
related software. Failure to comply may result in a poor experimental outcome but will not cause
bodily injury or equipment damage.
Federal Communications Commission Radio Frequency Interference Statement
WARNING: This equipment generates, uses, and can radiate radio frequency energy and if not installed in
accordance with the instruction manual, may cause interference to radio communications. It has been tested and
found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC rules,
which are designed to provide a reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference in which case the
user, at his own expense, will be required to take whatever measures may be required to correct the interference.
iii