®
C-DiGit
Blot Scanner
Back Panel
The C-DiGit back panel has the instrument ON/OFF switch and connectors for the USB and
Ethernet cables and the power supply.
12VDC 1A
Scanning Surface
The scanning surface is accessed by opening the lid on the C-DiGit Blot Scanner (Figure 1-4).
Figure 1-4. The imaging surface is designed to scan a single membrane up to 10 cm x 8.5 cm.
Scanning Surface Safety
Be careful not to get your fingers caught between the C-DiGit instrument lid and the base of the
scanning surface when the lid is closed. Do not put excessive pressure on the scanning surface.
Page 5