Sample Placement - LI-COR C-DiGit User Manual

Chapter 1: Introduction
Clean the scanning surface with 100% methanol, then water. CAUTION: DO NOT use acetone to
clean the imaging surface.

Sample Placement

The C-DiGit Blot Scanner Imaging Surface has a clear window that delineates the edges of the
C-DiGit Blot Scanner scanning surface. Membranes up to 10 cm x 8.5 cm placed within these
markers will be fully imaged. Membranes can be placed anywhere within the imaging area to be
scanned.
Membranes should be placed sample side down with the top toward the back of the instrument.
Tips for handling and imaging membranes are given in Scanning Membranes on page 19.
Page 6