2 OVERVIEW
The Fortus 250mc system builds models, including internal features, from CAD STL files. Three-dimensional
parts are built by extruding a bead of ABS plastic through a computer-controlled extrusion head, producing high
quality parts that are ready to use immediately after completion. With three layer resolution settings, you can
choose to build a part quickly for design verification, or you can choose a finer setting for higher quality surface
detail.
The Fortus 250mc system consists of two primary components — the Fortus 250mc system and Insight. Insight
is the preprocessing software that runs on a Windows Vista or Windows 7 platform.
The build envelope measures 254 x 254 x 305 mm (10 x 10 x 12 in). Each material cartridge contains 922 cc
(56.3 cu. in.) of usable material.
4