Kyocera FS-2020D Service Manual page 90

2J0/2J1/2J2
(3) Detaching and refitting the power source unit (PWB)
Procedure
1. Remove the top cover (See page 1-5-3).
2. Remove the right cover (See page 1-5-4).
3. Remove the drum unit (See page 1-5-12).
4. Remove one connector (YC11) from the
connect-L PWB.
5. Remove the wires from the drum grounding
plate and clamp.
6. Release two hooks and then remove the
PSU fan motor.
1-5-32
Downloaded from www.Manualslib.com manuals search engine
Connector (YC11)
Connect-L PWB
Drum grounding
Wire
plate
Clamp
Hook
PSU fan motor
Figure 1-5-43
Hook