Maintenance Mode - Kyocera FS-2020D Service Manual

1-3 Maintenance Mode

1-3-1 Maintenance mode
The printer is equipped with a maintenance function which can be used to maintain and service the machine.
(1) Executing a maintenance item
To scroll these items,
press the
repeatedly.
Downloaded from www.Manualslib.com
Message display
Ready
Press the MENU key.
Report Print >
Press the
until [Adjust/Maintenance >] is displayed.
Adjust/ >
Maintenance
Press the
Maintenance mode items
>>Print
Status Page
>>Print Network
Status Page
>>Print
Test Page
>>Write Data
or key
>>Maintenance
>>Developer
>>DRUM-CTRL
>>Drum
manuals search engine
or key several times
>Restart
Printer
key. Press the
until [>Service >] is displayed.
>Service >
Press the
To print a status page for service purpose.
(See page 1-3-2)
To print a network status page.
(See page 1-3-6)
Prints a test page which contains halftone.
(See page 1-3-7)
To write data into a USB memory.
(See page 1-3-7)
To reset counter for the maintenance kit.
(See page 1-3-8)
To initialize the developing unit. (toner install mode)
(See page 1-3-8)
To perform a automatic drum refreshing.
(See page 1-3-9)
To perform a drum refreshing.
(See page 1-3-9)
2J0/2J1/2J2
or key several times
key.
1-3-1