Function Setting List - JUKI SC-920 Instruction Manual

7. Function setting list

No. Item
1 Soft start The number of stitches to be sewn at a low speed when the soft-
function start function is used at the start of sewing.
0 : The function is not selected.
1 to 9 : The number of stitches to be sewn under the soft-
2 Material end Material end sensor function (to be used only with CP-18).
sensor function 0 : Material end detection function is not operative.
1 : After detecting material end, the specified number of
3 Thread trimming Thread trimming function by material end sensor (to be used
function by only with CP-18).
material end 0 : Automatic thread trimming function after detection of
sensor
1 : After detecting material end, the specified number of
4 Number of Number of stitches for material end sensor (to be used only with
stitches for CP-18).
material end Number of stitches from detection of material end to stop of the
sensor sewing machine.
5 Flicker reducing Flicker reducing function
function
0 : Flicker reducing function is not operative.
1 : Flicker reducing function is effective
6 Bobbin thread Bobbin thread counting function
counting
0 : Bobbin thread counting function is not operative.
function
1 : Bobbin thread counting function is operative.
7 Unit of bobbin Unit of bobbin thread counting down
thread counting 0 : 1 Count/10 stitches
*
down 1 : 1 Count/15 stitches
2 : 1 Count/20 stitches
3 : 1 Count/thread trimming
8 Number of Sewing speed of reverse feed stitching
rotation of
*
reverse feed
stitching
9 Thread trimming Thread trimming prohibiting function (to be used only with CP-18).
prohibiting 0 : Thread trimming is effective.
function
1 : Thread trimming is prohibited.
10 Setting of Position of needle bar is specified when the sewing machine
needle bar stop stops.
position when 0: The needle bar stops at its lower position.
the sewing 1: The needle bar stops at its upper position.
machine stops.
11 Operation Operation confirmation sound for operation panel
confirmation
0 : Operation confirmation sound is not generated
sound for
1 : Operation confirmation sound is generated.
operation panel
12 Optinal switch Switching of function of optional switch.
function
selection
13 Function of Function of prohibiting start of the sewing machine by bobbin thread counting
prohibiting start
0 : When counting is out (-1 or less) Function of prohibiting
of the sewing
machine by
1 : When counting is out (-1 or less) Function of prohibiting
bobbin thread
*
counter
2 : When counting is out (-1 or less), the sewing machine
14 Sewing counter Counting function of sewing (number of completion of process)
0 : Sewing counter function is not operative.
1 : Sewing counter function is operative. (Every time thread
2 : With the sewing counting switch input function
15 Thread wiping Thread wiping operation after thread trimming is specified.
function after 0 : Thread wiping is not carried out after thread trimming
thread trimming 1 : Thread wiping is carried out after thread trimming
21 Function of Function of lifting presser foot when the pedal is in neutral posi-
automatic tion.
presser foot 0 : Function of neutral automatic presser lifting is not opera-
lifting at pedal's
neutral position 1 : Selection of function of neutral presser lifting.
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer's Manual and follow the instructions.
Description
start mode.
stitches (No. 4) will be sewn, and the sewing machine will
stop.
material end is not operative.
stitches (No. 4) will be sewn, and the sewing machine will
stop and perform automatic thread trimming.
(Output of solenoid is prohibited. : Thread trimmer and wiper)
start of the sewing machine is not operative.
start of the sewing machine after thread trimming is oper-
ative.
stops once. Function of prohibiting start of the sewing
machine after thread trimming is operative.
trimming is performed)
tive.
Setting range
0 to 9
(Stitches)
0/1
0/1
0 to 19
(Stitches)
0/1
0/1
0 to 3
150 to 3,000
(sti/min)
0/1
0/1
0/1
0 to 2
0 to 2
0/1
0/1
– 24 –
Indication of function setting Ref. page
1 0
28
2 0
28
3 0
28
4 5
28
5 0
28
6 1
28
7 0
8 1 9 0 0
9 0
28
1 0 0
28
1 1 1
28
1 2 o P T _
29
1 3 0
1 4 1
32
1 5 1
2 1 0
32