JUKI SC-920 Instruction Manual page 32

Input function list
Function Abbrevia-
code tion
0 noP No function
1 HS Needle up / down compensat-
ing stitching
2 bHS Back compensating stitching
3 EbT Function of canceling once re-
verse feed stitching at the end
of sewing
4 TSW Thread trimming function
5 FL Presser foot lifting function
6 oHS One stitch compensating
stitching
7 SEbT Function of cancel of reverse
feed stitching at start/end
8 PnFL Presser lifting function when
pedal is neutral
9 Ed Material edge sensor input
10 LinH Function of prohibiting de-
pressing front part of pedal
11 TinH Function of prohibiting thread
trimming output
12 LSSW Low speed command input
13 HSSW High speed command input
14 USW Needle lifting function
15 bT Reverse feed stitching switch
input
16 SoFT Soft start switch input
oSSW
17 One-shot speed command
switch input
bKoS
18 Backward one-shot speed
command switch input
SFSW
19 Safety switch input
MES
20 Thread trimming safety switch
input
AUbT
21 Automatic reverse feed stitch-
ing cancellation/addition switch
CUnT
22 Sewing counter input
23 Tiin Tsw command prohibition input
24 USTP Lsw command prohibition/nee-
dle-up stop input
Function item
– 30 –
Remarks
(Standard setting)
Every time the switch is pressed, normal feed stitching
by half stitch is performed. (Same operation as that of
up / down compensating stitching switch on the panel.)
Reverse feed stitching is performed at low speed while
the switch is held pressing. (It is effective only when a
constant-dimension sewing is selected.)
By depressing the back part of the pedal after press-
ing the switch, operation of reverse feed stitching is
canceled once.
This function is actuated as the thread trimming
switch.
This function is actuated as the foot lifter switch.
Every time the switch is pressed, one stitch stitching
operation is executed.
By operating the optional switch, ineffective/effective
can be alternately changed over.
Every time the switch is pressed, the function whether
automatically lifting the presser foot when the pedal is
neutral or not can be selected.
This function works as the input signal of material
edge sensor.
Rotation by pedal is prohibited.
Output of thread trimming is prohibited.
This function works as low speed switch for standing
sewing machine.
This function works as high speed switch for standing
sewing machine.
UP stop motion is performed when switch is pressed
during DOWN stop.
Reverse feed stitching is output as long as the switch
is held pressed.
The speed of stitch is limited to the predetermined
soft-start speed as long as the switch is held pressed.
This function works as one-shot speed command as
long as the switch is pressed.
Reverse feed stitching is performed in accordance with
the one-shot speed command as long as the switch is
held pressed.
Rotation is prohibited.
It operates as an input signal of the thread trimmer
safety switch.
Every time the switch is pressed, reverse feed stitch-
ing at sewing start or reverse feed stitching at sewing
end is cancelled or added.
Every time the switch is pressed, the sewing counter
value is increased.
Thread trimming command is prohibited.
Sewing by means of the pedal switch is prohibited.
The sewing machine stops with its needle up during
sewing.