Field Boundary Tools - Raven ENVIZIO PRO Installation And Operation Manual

Field Boundary Tools

The following Menu tools and features are available while creating a field boundary.
Note:
Zone maps are only available if the Raven AccuBoom, automatic boom section control, feature is
enabled. Refer to Chapter 9, Using AccuBoom™, for more information using the AccuBoom
feature or contact a local Raven dealer for more information about the Raven AccuBoom system.
Loading a Field Boundary
A previously recorded boundary may be loaded into the current job file by selecting the Load Field
Boundary icon in the Menu. A list of job files or boundaries stored on the field computer is
displayed. Select the desired boundary to load into the current job.
Note:
Field boundaries exported from the Envizio Pro will be named either using the job file name
entered when the job was started or the Zone Map name set for the map created during the job.
Shapefile boundaries may be renamed on a PC or laptop computer and re-imported to the Envizio
Pro for future operations.
Recording a New Field Boundary
Touch the Record Field Boundary icon to begin recording a new field boundary. While a field
boundary is being recorded, the Pause and End Field Boundary icons (see the following icon
descriptions) are displayed on the Guidance screen.
P/N 016-0171-493 Rev. I
Basic Operation
Recorded
Boundary Path
Pause/End
Boundary
81